​the Best 802.11n Signal Can Travel Approximately How Far?
The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking i of the following links.
- Safari
- Chrome
- Edge
- Firefox
Recommended Settings for 802.11n Connectivity
Documentation
Maintenance & Performance
000005544
eleven/x/2020
Below are the default and recommended settings for Intel® Wireless Adapters supporting 802.11n. To change these settings, come across Advanced Intel® Wireless Adapter Settings.
Default/recommended settings
| Holding | Value |
| Channel Width for 2.4GHz | Auto (AP determines width) |
| Aqueduct Width for 5GHz | Auto (AP determines width) |
| 802.11n Mode (for legacy adapters merely) | Enabled |
| Fatty Channel Intolerant | Disabled |
| Roaming Aggressiveness | Medium |
| Throughput Booster | Disabled |
| Transmit Ability | Highest |
| 802.11a/b/g Wireless Mode or Wireless Mode | Dual Band 802.11a/b/g or 802.11a/b/grand |
| 802.11n/ac Wireless Mode or HT manner | 802.11ac or VHT mode |
| Note |
|
Make sure you've configured your access indicate (AP) or Wi-Fi router for 11n mode. If you aren't certain if the AP is configured for 11n, contact your AP manufacturer.
Key settings related to 11n
| Note | The actual name and characteristic of the setting may vary depending on the AP. Cheque the user manual or contact manufacturer of your AP for details. |
- Channel
Controls the channel your AP uses to communicate with client devices on your Wi-Fi network.
Most APs should take this set to Auto past default. We don't recommend changing this setting unless y'all:- Have a good agreement of Wi-Fi channels
- Know how to determine the least congested channel in your environment
Almost of the time, Channel 1~14 (2.4GHz) are more congested than Channel 36~ (5GHz) but this can differ depending on the environment.
Some newer or higher-end APs are capable of operating at multiple bands (or channels) at the same time. For example, you may configure the AP to use Channel1@ii.4GHz and Channel40@5GHz at the same fourth dimension.
- Channel Width or aqueduct bandwidth
Controls the width of the channel (xx or 40MHz) your AP uses to communicate with client devices on your Wi-Fi network. Wider channel width allows higher performance.
Note Certain AP may non have this setting simply instead have a different setting called transmission speed or like. For optimal performance and compatibility, enable support for all channel widths. Certain AP may allow 40MHz only manner which prevents legacy devices that support only 20MHz from connecting to the AP.
- (Wireless) Mode
This setting controls the type of Wi-Fi devices (802.11a/b/g/due north/air conditioning) that can connect to the AP.
For optimal performance and compatibility, enable back up for all wireless modes.
If configured for 11n mode only, legacy devices that support merely 11a/b/g aren't able to connect to the AP.
Related Products
This article applies to 38 products.
Discontinued Products
Give Feedback
Source: https://www.intel.com/content/www/us/en/support/articles/000005544/wireless.html
0 Response to "​the Best 802.11n Signal Can Travel Approximately How Far?"
Post a Comment